Comments on: Cleaning for High Power and Long Range http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/ Sinclair International Precision Shooting Blog Mon, 02 Jan 2012 18:58:22 -0500 http://wordpress.org/?v=2.8.4 hourly 1 By: flyttst http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1461 flyttst Sat, 28 Nov 2009 14:01:24 +0000 http://blog.sinclairintl.com/?p=439#comment-1461 Nice to be visiting your blog again. Thanks for posting this informative post. Best regards, Lillian Brown ~ Flyttst Nice to be visiting your blog again. Thanks for posting this informative post. Best regards, Lillian Brown ~ Flyttst

]]> By: Marianne http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1251 Marianne Mon, 28 Sep 2009 16:59:04 +0000 http://blog.sinclairintl.com/?p=439#comment-1251 No, the Iosso Bore Cleaner is not abrasive to the bore. It will not damage or remove metal. It works chemically. Use it with the Iosso Eliminator Bore Brushes for removing all fouling. The Iosso Eliminator Gun Oil is good for a final finish. No, the Iosso Bore Cleaner is not abrasive to the bore. It will not damage or remove metal. It works chemically. Use it with the Iosso Eliminator Bore Brushes for removing all fouling. The Iosso Eliminator Gun Oil is good for a final finish.

]]> By: Chris Seung http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1235 Chris Seung Fri, 18 Sep 2009 14:17:57 +0000 http://blog.sinclairintl.com/?p=439#comment-1235 I use an Outer's Foul Out electronic bore cleaning system. You "set it and forget it". It saves a lot of time and energy because you only run the rod through the bore a few times. I use an Outer’s Foul Out electronic bore cleaning system. You “set it and forget it”. It saves a lot of time and energy because you only run the rod through the bore a few times.

]]> By: Claudio Ascari - ITALY http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1234 Claudio Ascari - ITALY Fri, 18 Sep 2009 08:22:26 +0000 http://blog.sinclairintl.com/?p=439#comment-1234 Good morning. A bronze bore brush is OK for TM solution (for my hunting rifles I use also a solution of 50% Shooter Choise n°10 and 50% of KROL oil). I think (but I'm not sure) that a bronze bore brush is not suitable for Boretech Eliminator and the brush material (bronze) will be mixed with copper fouling in the bore, with a quick consumption of the broze brush. It's correct? I use more or less the same your procedure, but every four rounds (twenty shots) and using a nylon brush wet of Boretech Eliminator. Am I wrong with nylon brush ?? Thanks for a reply. Good morning.
A bronze bore brush is OK for TM solution (for my hunting rifles I use also a solution of 50% Shooter Choise n°10 and 50% of KROL oil).
I think (but I’m not sure) that a bronze bore brush is not suitable for Boretech Eliminator and the brush material (bronze) will be mixed with copper fouling in the bore, with a quick consumption of the broze brush. It’s correct?
I use more or less the same your procedure, but every four rounds (twenty shots) and using a nylon brush wet of Boretech Eliminator.
Am I wrong with nylon brush ??
Thanks for a reply.

]]> By: Steve Savage http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1231 Steve Savage Thu, 17 Sep 2009 20:09:29 +0000 http://blog.sinclairintl.com/?p=439#comment-1231 Great article, do you consider Kroil to be a suitable oil to leave in the barrel after the cleaning process? Rgds, Steve Great article, do you consider Kroil to be a suitable oil to leave in the barrel after the cleaning process?
Rgds, Steve

]]> By: Gene Shiller, Lansdale, PA http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1230 Gene Shiller, Lansdale, PA Thu, 17 Sep 2009 19:21:45 +0000 http://blog.sinclairintl.com/?p=439#comment-1230 Ron, Your article is wonderfully informative. Thank you for sharing. Gene Ron,

Your article is wonderfully informative. Thank you for sharing.

Gene

]]> By: Glenn Oyama http://blog.sinclairintl.com/2009/09/16/cleaning-for-high-power-and-long-range/comment-page-1/#comment-1228 Glenn Oyama Thu, 17 Sep 2009 18:29:26 +0000 http://blog.sinclairintl.com/?p=439#comment-1228 Is the Iosso bore cleaner harmful to the bore? Is it a abrasive cleaner? Is the Iosso bore cleaner harmful to the bore? Is it a abrasive cleaner?

]]>